This tooth delivers very clean cuts on laminates and non-ferrous metals. Demolition: The cutting material of demolition blades is very complex. Ideal for: Cutting poor quality chipboard, as well as wood with loose knots and nails due to its anti-kickback design to add safety. The blades also have a chip limiter at the back of the tooth shoulder that limits the maximum tooth bite for controlling the feed speed to the safe rate. These blades feature big teeth bites the distance between two teeth , so it is necessary to use these on a machine that has a chip limiter to control the feed speed, to prevent the kickback.
Milled: This design is less finely sharpened and tears the wood fibres rather than cuts. The saw set leaves traces during the movement of the blade from top to bottom, hence delivers a rough cut in the wood.
Wavy Set: This wave design maintains surface contact between the blade and the material to avoid jolting and thus ensures a straight cut. Ground: This design creates a sharp edge with a very straight alignment of teeth. The edge of each tooth is perpendicular to the cutting axis, which allows each tooth to work over its entire width to deliver fine, sharp and very clean cuts.
Ground Side Set: This design cuts according to the oblique angle of the teeth. The higher the hook angle, the more aggressively the saw blade will cut the material. This is great for getting through a lot of material fast, especially when you are ripping. Low negative hook angles - those that have teeth that angle backwards away from the direction of rotation , are good for crosscutting, cutting plywood panels or non-wood materials, such as plastics and metal.
By understanding whether you need a higher number of teeth and the desired teeth shape, this helps you select the right blade to achieve the desired finish on your material. Download the Wood Range catalogue and follow these steps to choose the right blade for your needs:.
Product dimensions can be found underneath each product line when viewing the product in the catalogue, e.
A variety of cut types are available, such as ripping and finishing. You can also see the teeth design information in the key specification data underneath each product line. When working on wood materials, we recommend wearing a mask and safety glasses, as well as ear protection and gloves during heavy duty usage.
They're going to be bigger chips and so the larger gullet allows for the clearance of those chips. If you're going to be cross cutting and you're cutting against the grain, each chip that you're pulling out is going to be much smaller. So never use a blade with a large gullet, it will ruin your timber! If you buy a cross-cutting blade for long, rough pieces of wood, be prepared for a much slower, almost-arduous cut. It all comes down to the more teeth the finer cut, but where people go wrong is over-speccing.
In terms of features, look for laser-cut blades with large, meaty carbide tips. This makes them quieter and extends the lifespan, allowing plenty of re-sharpens. Last but certainly not least are engineered expansions slots those little fish-hook holes in the blade face. They reduce blade noise, prevent warping under heat and are very important to maintain the blade shape and accuracy. Timbecon Family Newsletter Signup to get the latest news and specials.
A comprehensive buyer's guide to saw blades Sawing. The difference between ripping, cross-cut and combination saw blades Bare essentials: ripping blades are better suited to long, straight cuts because they cut quicker. Your saw blade performance basics There are three main features that affects how the blade performs: The number of the teeth on the blade The angle of the face of that tooth to the blade The bevel: the angle of the top of those teeth In general, the more teeth you have the cleaner the cut is going to be, but more teeth also slows the cut down.
My Cart Close. Your cart is empty Browse products and add to your cart. Smaller teeth, on the other hand, allow for a better finish, so are ideal when making crosscuts cutting across the grain of the wood or material. The angle of the hook or rake refers to the position the blade tooth is in when it hits the cutting surface.
Hook angles can be positive, negative or neutral. A positive hook angle points downwards towards the cutting surface, creating a faster and rougher cut. For some cutting applications such as metal cutting, a positive hook can be dangerous. A more negative hook angle will provide a less aggressive cut and create a smoother finish. This will be a slower cut that removes less waste, however. A neutral hook angle means that the face of the cutting tool is perpendicular to the cutting edge at the inner side.
The bore is the hole at the centre of your saw blade, which is where you attach the blade to your saw. You can select a saw blade that with a bore that has a higher diameter than the bore shaft of your saw, however, you must use a reducer ring to get the right fit.
If you need affordable and high-quality circular saw blades compatible with all major brands of circular saws including Makita, Bosch, and Dewalt. Get great deals on circular saw blades today.
How to Choose a Circular Saw Blade. Blade Diameter:. The Number of Teeth:. The Gullet:.
0コメント